使用webgl(three.js)创建3D机房,3D机房微模块详…

2019-03-10 11:53:30来源:博客园 阅读 ()

新老客户大回馈,云服务器低至5折

序:

上节课已经详细描述了普通机房的实现过程,文章地址(https://www.cnblogs.com/yeyunfei/p/10473021.html)

紧接着上节课的内容 我们这节可来详细讲解机房微模块的三维实现

首先我们先看一下整体的效果图:

这是单个微模块的模拟最后的系统效果

下面我们进入正文,详细讲解创建过程(机房的以及其它动力环境的创建 前面的课程已经讲诉 这里不在累赘描述)

一、创建组件

 正所谓造车得现有轮子,那么搭建整个机房得先创建一个个小的组件,最后组合成大的模块。我们的步骤是由内而外。

  1.1、先创建服务器,大量的json参数 利于控制服务器的所有属性

var server={//服务器模型参数
	"show": true,
	"uuid": "",
	"name": "equipment_card_2_4",
	"objType": "cube",
	"length": 60,
	"width": 65,
	"height": 20,
	"x": 0,
	"y": 300,
	"z": 0,
	"style": {
		"skinColor": 9593611,
		"skin": {
			"skin_up": {
				"skinColor": 9593611,
				"imgurl": "../../img/3dImg/rack_inside.jpg"
			},
			"skin_down": {
				"skinColor": 9593611,
				"imgurl": "../../img/3dImg/rack_inside.jpg"
			},
			"skin_fore": {
				"skinColor": 9593611,
				"imgurl": "../../img/3dImg/rack_inside.jpg"
			},
			"skin_behind": {
				"skinColor": 9593611,
				"imgurl": "../../img/3dImg/server2.jpg"
			},
			"skin_left": {
				"skinColor": 9593611,
				"imgurl": "../../img/3dImg/rack_inside.jpg"
			},
			"skin_right": {
				"skinColor": 9593611,
				"imgurl": "../../img/3dImg/rack_inside.jpg"
			}
		}
	},
	"showSortNub": 4
};
var serverModel=WT.commonFunc.createServer(server);//服务器模型生成

  1.2、服务器端口

    var postParam=webApi.getPortsFromServerByServerid(serverid);//获取服务端口参数

    WT.commonFunc.createPorts(portParam);//更具服务器id创建服务器端口
 这样服务器的效果就出来了

   

 2.1机柜模型实现

由于机柜的模型是可以运动分解的模型 这样模型的代码要稍微多一点 这样才能做到控制机柜的每一个有意义的零件

机柜模型代码如下:

{
                show: true,
                name: 'cabinet3',
                actionSign: "cabinet1",
                shellname: 'cabinet3_emptyCabinetshell',
                uuid: '',
                // rotation: [{ direction: 'y', degree: 0.25*Math.PI}],//旋转     uuid:'',
                objType: 'emptyCabinet2',
                transparent: true,
                size: { length: 66, width: 70, height: 200, thick: 2 },
                position: { x: 0, y: 305, z: 0 },
                doors: {
                    doorType: 'lr',// ud上下门 lr左右门 单门可以缺省
                    doorSize: [1],
                    doorname: ['cabinet3_emptyCabinetdoor_01'],
                    skins: [{
                        skinColor: 0x333333,
                        skin_fore: {
                            imgurl: "../../img/3dImg/rack_door_back.jpg",
                        },
                        skin_behind: {
                            imgurl: "../../img/3dImg/rack_front_door.jpg",
                        }
                    }]
                },
                style: {
                    skinColor: 0xff0000,
                    skin: {
                        skinColor: 0xff0000,
                        skin_up: { imgurl: "../../img/3dImg/rack_door_back.jpg" },
                        skin_down: { imgurl: "../../img/3dImg/rack_door_back.jpg" },
                        skin_fore: {
                            skinColor: 0xff0000,
                            imgurl: "../../img/3dImg/rack1.png"
                        },
                        skin_behind: {
                            skinColor: 0xff0000,
                            imgurl: "../../img/3dImg/rack2.png"
                        },
                        skin_left: { imgurl: "../../img/3dImg/rack_door_back.jpg" },
                        skin_right: { imgurl: "../../img/3dImg/rack_door_back.jpg" },
                    }
                }
            }

机柜效果如下

2.2,接着我们的创建一个虚拟的机框模型,为了达到美工妹妹的效果 我们的虚拟机框还得放光发亮

知识点:这里用到了发光体 和 管道渲染的技术

var boderModel=THREE.commonFunc.borderLight(serverid);//这里就是创建机柜发光的边的模型 其实这是和机柜本身模型分开的 只是使用了机柜的参数

3.1组合成微模块 这样一个微模块就实现了

在这里我们预先微模块都是两行多列的 而且中间的距离是机柜厚度的2.5倍 所以我们只需要一个机柜的位置参数就可以了

/*

*获取机柜在模块总的位置

*position:[{1,1,uuid-xxxx-xxxx-xxxxx-xx},{1,2,uuid-xxxx-xxxx-xxxxx-xx},{1,3,uuid-xxxx-xxxx-xxxxx-xx}]...

这是一个数组,存储的是行和列 以及id

*/

 var  microModel=THREE.commonFunc.createMicroModule(serverid);

这样 微模块的雏形就创建完成啦,接着就是交给美工妹妹去优化配色方案 再修改

 

二、搭建组合数据中心

 首先是环境模型

用json去创建机房环境

[{
    "rotation": [{
        "degree": 0,
        "direction": "x"
    }, {
        "degree": 0,
        "direction": "y"
    }, {
        "degree": 0,
        "direction": "z"
    }],
    "show": true,
    "length": 220,
    "scale": {
        "x": 1,
        "y": 1,
        "z": 1
    },
    "uuid": "",
    "name": "doorCaseTop",
    "width": 24,
    "x": -300,
    "y": 220,
    "z": -350,
    "style": {
        "skinColor": 9095650,
        "skin": {
            "skin_behind": {
                "skinColor": 13819101
            },
            "skin_up": {
                "skinColor": 13819101
            },
            "skin_left": {
                "skinColor": 13819101
            },
            "skin_fore": {
                "skinColor": 13819101
            },
            "skin_down": {
                "skinColor": 13819101
            },
            "skin_right": {
                "skinColor": 13819101
            }
        }
    },
    "objType": "cube",
    "height": 5
}, {
    "rotation": [{
        "direction": "x",
        "degree": 0
    }, {
        "direction": "y",
        "degree": 0
    }, {
        "direction": "z",
        "degree": 0
    }],
    "show": true,
    "length": 20,
    "scale": {
        "x": 1,
        "y": 1,
        "z": 1
    },
    "uuid": "",
    "name": "Leftwall",
    "width": 810,
    "x": 490,
    "y": 120,
    "z": 50,
    "style": {
        "skinColor": 9095650,
        "skin": {
            "skin_up": {
                "skinColor": 14540253
            },
            "skin_down": {
                "skinColor": 14540253
            },
            "skin_fore": {
                "skinColor": 12434877
            },
            "skin_behind": {
                "skinColor": 12434877
            },
            "skin_left": {
                "skinColor": 14540253
            },
            "skin_right": {
                "skinColor": 12434877
            }
        }
    },
    "objType": "cube",
    "height": 240,
    "showSortNub": 1,
    "animation": null,
    "dbclickEvents": null,
    "thick": null,
    "BindDevId": null,
    "BindDevName": null,
    "devInfo": null,
    "BindMeteId": null,
    "BindMeteName": null
}, {
    "rotation": {
        "0": {
            "direction": "x",
            "degree": 0
        },
        "1": {
            "direction": "y",
            "degree": 0
        },
        "2": {
            "direction": "z",
            "degree": 0
        }
    },
    "show": true,
    "length": 1000,
    "scale": {
        "x": 1,
        "y": 1,
        "z": 1
    },
    "uuid": "",
    "childrens": [{
        "op": "-",
        "show": true,
        "uuid": "",
        "name": "doorhole",
        "objType": "cube",
        "width": 20,
        "height": 220,
        "length": 220,
        "x": -300,
        "y": -10,
        "z": 0,
        "style": {
            "skinColor": 9095650
        }
    }, {
        "op": "-",
        "show": true,
        "uuid": "",
        "name": "windowHole",
        "objType": "cube",
        "width": 20,
        "height": 160,
        "length": 500,
        "x": 200,
        "y": 10,
        "z": 0,
        "style": {
            "skinColor": 9095650
        }
    }],
    "name": "forewall",
    "width": 20,
    "x": 0,
    "y": 120,
    "z": -350,
    "style": {
        "skinColor": 9095650,
        "skin": {
            "skin_up": {
                "skinColor": 14737632
            },
            "skin_down": {
                "skinColor": 12434877
            },
            "skin_fore": {
                "skinColor": 12434877
            },
            "skin_behind": {
                "skinColor": 12434877
            },
            "skin_left": {
                "skinColor": 12434877
            },
            "skin_right": {
                "skinColor": 12434877
            }
        }
    },
    "objType": "holeCube",
    "height": 240,
    "showSortNub": 1,
    "animation": null,
    "dbclickEvents": null,
    "thick": null,
    "BindDevId": null,
    "BindDevName": null,
    "devInfo": null,
    "BindMeteId": null,
    "BindMeteName": null
}, {
    "rotation": [{
        "direction": "x",
        "degree": 0
    }, {
        "direction": "y",
        "degree": 0
    }, {
        "direction": "z",
        "degree": 0
    }],
    "show": true,
    "length": 20,
    "scale": {
        "x": 1,
        "y": 1,
        "z": 1
    },
    "uuid": "",
    "name": "Rightwall",
    "width": 810,
    "x": -490,
    "y": 120,
    "z": 50,
    "style": {
        "skinColor": 9095650,
        "skin": {
            "skin_up": {
                "skinColor": 14540253
            },
            "skin_down": {
                "skinColor": 14540253
            },
            "skin_fore": {
                "skinColor": 12434877
            },
            "skin_behind": {
                "skinColor": 12434877
            },
            "skin_left": {
                "skinColor": 13224393
            },
            "skin_right": {
                "skinColor": 14540253
            }
        }
    },
    "objType": "cube",
    "height": 240,
    "showSortNub": 1,
    "animation": null,
    "dbclickEvents": null,
    "thick": null,
    "BindDevId": null,
    "BindDevName": null,
    "devInfo": null,
    "BindMeteId": null,
    "BindMeteName": null
}, {
    "rotation": [{
        "direction": "x",
        "degree": 0
    }, {
        "direction": "y",
        "degree": 0
    }, {
        "direction": "z",
        "degree": 0
    }],
    "show": true,
    "length": 1800,
    "scale": {
        "x": 1,
        "y": 1,
        "z": 1
    },
    "uuid": "",
    "name": "floor_2",
    "width": 1600,
    "x": 32.156,
    "y": -8.708,
    "z": 11.662,
    "style": {
        "skinColor": 9095650,
        "skin": {
            "skin_up": {
                "skinColor": 9991439,
                "imgurl": "../../img/3dImg/grasslight-big.jpg",
                "repeatx": true,
                "width": 512,
                "repeaty": true,
                "height": 512
            },
            "skin_down": {
                "skinColor": 3184895,
                "imgurl": "../../img/3dImg/grasslight-big.jpg"
            },
            "skin_fore": {
                "skinColor": 10592673
            },
            "skin_behind": {
                "skinColor": 2968869
            },
            "skin_left": {
                "skinColor": 2968869
            },
            "skin_right": {
                "skinColor": 2968869
            }
        }
    },
    "objType": "cube",
    "height": 10,
    "showSortNub": 1,
    "animation": null,
    "dbclickEvents": null,
    "thick": null,
    "BindDevId": null,
    "BindDevName": null,
    "devInfo": null,
    "BindMeteId": null,
    "BindMeteName": null
}, {
    "doors": {
        "skins": [{
            "skin_behind": {
                "imgurl": "../../img/3dImg/rack_front_door.jpg"
            },
            "skinColor": 3355443,
            "skin_fore": {
                "imgurl": "../../img/3dImg/rack_door_back.jpg"
            }
        }],
        "doorname": ["cabinet3_2_emptyCabinetdoor_01"],
        "doorType": "lr",
        "doorSize": [1]
    },
    "size": {
        "length": 66,
        "width": 70,
        "thick": 2,
        "height": 200
    },
    "shellname": "cabinet3_2_emptyCabinetshell",
    "show": true,
    "name": "cabinet3_2",
    "scale": {
        "x": 1,
        "y": 1,
        "z": 1
    },
    "style": {
        "skinColor": 16711680,
        "skin": {
            "skin_behind": {
                "imgurl": "../../img/3dImg/rack_door_back.jpg",
                "skinColor": 16711680
            },
            "skin_up": {
                "imgurl": "../../img/3dImg/rack_door_back.jpg"
            },
            "skinColor": 16711680,
            "skin_left": {
                "imgurl": "../../img/3dImg/rack_door_back.jpg"
            },
            "skin_fore": {
                "imgurl": "../../img/3dImg/rack_door_back.jpg",
                "skinColor": 16711680
            },
            "skin_down": {
                "imgurl": "../../img/3dImg/rack_door_back.jpg"
            },
            "skin_right": {
                "imgurl": "../../img/3dImg/rack_door_back.jpg"
            }
        }
    },
    "position": {
        "x": -100,
        "y": 105,
        "z": -80
    },
    "uuid": "",
    "objType": "emptyCabinet",
    "transparent": true
}, {
    "rotation": [{
        "degree": 0.3141592653589793,
        "direction": "y"
    }],
    "name": "FireExtinguisher_3",
    "fileurl": "../../img/3dImg/OBJS/FireExtinguisher.json",
    "scale": {
        "x": 15,
        "y": 12,
        "z": 15
    },
    "position": {
        "x": -460,
        "y": 8,
        "z": -250
    },
    "objType": "jsonobj"
}, {
    "rotation": [{
        "degree": 0.9424777960769379,
        "direction": "y"
    }],
    "show": true,
    "name": "aircondition",
    "length": 60,
    "width": 80,
    "x": -420,
    "y": 130,
    "z": 370,
    "style": {
        "skinColor": 16711422,
        "skin": {
            "skin_fore": {
                "imgurl": "../../img/3dImg/aircondition.jpg"
            }
        }
    },
    "uuid": "",
    "objType": "cube",
    "height": 220
}, {
    "rotation": [{
        "degree": 0,
        "direction": "x"
    }, {
        "degree": 0,
        "direction": "y"
    }, {
        "degree": 0,
        "direction": "z"
    }],
    "show": true,
    "length": 220,
    "scale": {
        "x": 1,
        "y": 1,
        "z": 1
    },
    "uuid": "",
    "name": "doorCaseBottom",
    "width": 24,
    "x": -300,
    "y": 5,
    "z": -350,
    "style": {
        "skinColor": 9095650,
        "skin": {
            "skin_behind": {
                "skinColor": 13819101
            },
            "skin_up": {
                "skinColor": 13819101
            },
            "skin_left": {
                "skinColor": 13819101
            },
            "skin_fore": {
                "skinColor": 13819101
            },
            "skin_down": {
                "skinColor": 13819101
            },
            "skin_right": {
                "skinColor": 13819101
            }
        }
    },
    "objType": "cube",
    "height": 5
}, {
    "rotation": [{
        "degree": 0.3141592653589793,
        "direction": "y"
    }],
    "name": "FireExtinguisher_2",
    "fileurl": "../../img/3dImg/OBJS/FireExtinguisher.json",
    "scale": {
        "x": 15,
        "y": 12,
        "z": 15
    },
    "position": {
        "x": -460,
        "y": 8,
        "z": -230
    },
    "objType": "jsonobj"
}, {
    "show": true,
    "name": "equipment_card_3",
    "length": 60,
    "width": 65,
    "x": -100,
    "y": 145,
    "z": -180,
    "style": {
        "skinColor": 9593611,
        "skin": {
            "skin_behind": {
                "imgurl": "../../img/3dImg/server3.jpg",
                "skinColor": 9593611
            },
            "skin_up": {
                "imgurl": "../../img/3dImg/rack_inside.jpg",
                "skinColor": 9593611
            },
            "skin_left": {
                "imgurl": "../../img/3dImg/rack_inside.jpg",
                "skinColor": 9593611
            },
            "skin_fore": {
                "imgurl": "../../img/3dImg/rack_inside.jpg",
                "skinColor": 9593611
            },
            "skin_down": {
                "imgurl": "../../img/3dImg/rack_inside.jpg",
                "skinColor": 9593611
            },
            "skin_right": {
                "imgurl": "../../img/3dImg/rack_inside.jpg",
                "skinColor": 9593611
            }
        }
    },
    "uuid": "",
    "objType": "cube",
    "height": 30
}, {
    "rotation": [{
        "degree": 0.3141592653589793,
        "direction": "y"
    }],
    "name": "FireExtinguisher_4",
    "fileurl": "../../img/3dImg/OBJS/FireExtinguisher.json",
    "scale": {
        "x": 15,
        "y": 12,
        "z": 15
    },
    "position": {
        "x": -460,
        "y": 8,
        "z": -270
    },
    "objType": "jsonobj"
}, {
    "rotation": [{
        "degree": 0,
        "direction": "x"
    }, {
        "degree": 0,
        "direction": "y"
    }, {
        "degree": 0,
        "direction": "z"
    }],
    "show": true,
    "length": 40,
    "scale": {
        "x": 1,
        "y": 1,
        "z": 1
    },
    "uuid": "",
    "name": "powerDCabinet1_87",
    "width": 80,
    "x": 462,
    "y": 132,
    "z": -223,
    "style": {
        "skinColor": 9095650,
        "skin": {
            "skin_behind": {
                "imgurl": "../../img/3dImg/pdg101.jpg",
                "skinColor": 12639968
            },
            "skin_up": {
                "skinColor": 16777215
            },
            "skin_left": {
                "imgurl": "../../img/3dImg/pdg102.jpg",
                "skinColor": 13692656
            },
            "skin_fore": {
                "imgurl": "../../img/3dImg/pdg103.jpg",
                "skinColor": 12639968
            },
            "skin_down": {
                "skinColor": 12639968
            },
            "skin_right": {
                "imgurl": "../../img/3dImg/pdg104.jpg",
                "skinColor": 13692656
            }
        }
    },
    "objType": "cube",
    "height": 120
}, {
    "show": true,
    "name": "equipment_card_2",
    "length": 60,
    "width": 65,
    "x": -100,
    "y": 120,
    "z": -180,
    "style": {
        "skinColor": 9593611,
        "skin": {
            "skin_behind": {
                "imgurl": "../../img/3dImg/server2.jpg",
                "skinColor": 9593611
            },
            "skin_up": {
                "imgurl": "../../img/3dImg/rack_inside.jpg",
                "skinColor": 9593611
            },
            "skin_left": {
                "imgurl": "../../img/3dImg/rack_inside.jpg",
                "skinColor": 9593611
            },
            "skin_fore": {
                "imgurl": "../../img/3dImg/rack_inside.jpg",
                "skinColor": 9593611
            },
            "skin_down": {
                "imgurl": "../../img/3dImg/rack_inside.jpg",
                "skinColor": 9593611
            },
            "skin_right": {
                "imgurl": "../../img/3dImg/rack_inside.jpg",
                "skinColor": 9593611
            }
        }
    },
    "uuid": "",
    "objType": "cube",
    "height": 20
}, {
    "doors": {
        "skins": [{
            "skin_behind": {
                "imgurl": "../../img/3dImg/rack_front_door.jpg"
            },
            "skinColor": 3355443,
            "skin_fore": {
                "imgurl": "../../img/3dImg/rack_door_back.jpg"
            }
        }],
        "doorname": ["cabinet1_5_emptyCabinetdoor_01"],
        "doorType": "lr",
        "doorSize": [1]
    },
    "size": {
        "length": 66,
        "width": 70,
        "thick": 2,
        "height": 200
    },
    "shellname": "cabinet1_5_emptyCabinetshell",
    "show": true,
    "name": "cabinet1_5",
    "scale": {
        "x": 1,
        "y": 1,
        "z": 1
    },
    "style": {
        "skinColor": 16711680,
        "skin": {
            "skin_behind": {
                "imgurl": "../../img/3dImg/rack_door_back.jpg",
                "skinColor": 16711680
            },
            "skin_up": {
                "imgurl": "../../img/3dImg/rack_door_back.jpg"
            },
            "skinColor": 16711680,
            "skin_left": {
                "imgurl": "../../img/3dImg/rack_door_back.jpg"
            },
            "skin_fore": {
                "imgurl": "../../img/3dImg/rack_door_back.jpg",
                "skinColor": 16711680
            },
            "skin_down": {
                "imgurl": "../../img/3dImg/rack_door_back.jpg"
            },
            "skin_right": {
                "imgurl": "../../img/3dImg/rack_door_back.jpg"
            }
        }
    },
    "position": {
        "x": 300,
        "y": 105,
        "z": 220
    },
    "uuid": "",
    "objType": "emptyCabinet",
    "transparent": true
}, {
    "values": [],
    "name": "btns",
    "objType": "BtnS"
}, {
    "rotation": [{
        "degree": -3.141592653589793,
        "direction": "x"
    }, {
        "degree": 1.2246468525851679e-16,
        "direction": "y"
    }, {
        "degree": -3.141592653589793,
        "direction": "z"
    }],
    "show": true,
    "length": 50,
    "scale": {
        "x": 1,
        "y": 1,
        "z": 1
    },
    "uuid": "",
    "name": "powerDCabinet2_88",
    "width": 80,
    "x": 451,
    "y": 87,
    "z": -83,
    "style": {
        "skinColor": 9095650,
        "skin": {
            "skin_behind": {
                "skinColor": 16448496
            },
            "skin_up": {
                "skinColor": 16777215
            },
            "skin_left": {
                "skinColor": 16448496
            },
            "skin_fore": {
                "imgurl": "../../img/3dImg/pdg201.jpg",
                "skinColor": 16448496
            },
            "skin_down": {
                "skinColor": 12639968
            },
            "skin_right": {
                "skinColor": 16448496
            }
        }
    },
    "objType": "cube",
    "height": 160
}, {
    "doors": {
        "skins": [{
            "skin_behind": {
                "imgurl": "../../img/3dImg/rack_front_door.jpg"
            },
            "skinColor": 3355443,
            "skin_fore": {
                "imgurl": "../../img/3dImg/rack_door_back.jpg"
            }
        }],
        "doorname": ["cabinet1_4_emptyCabinetdoor_01"],
        "doorType": "lr",
        "doorSize": [1]
    },
    "size": {
        "length": 66,
        "width": 70,
        "thick": 2,
        "height": 200
    },
    "shellname": "cabinet1_4_emptyCabinetshell",
    "show": true,
    "name": "cabinet1_4",
    "scale": {
        "x": 1,
        "y": 1,
        "z": 1
    },
    "style": {
        "skinColor": 16711680,
        "skin": {
            "skin_behind": {
                "imgurl": "../../img/3dImg/rack_door_back.jpg",
                "skinColor": 16711680
            },
            "skin_up": {
                "imgurl": "../../img/3dImg/rack_door_back.jpg"
            },
            "skinColor": 16711680,
            "skin_left": {
                "imgurl": "../../img/3dImg/rack_door_back.jpg"
            },
            "skin_fore": {
                "imgurl": "../../img/3dImg/rack_door_back.jpg",
                "skinColor": 16711680
            },
            "skin_down": {
                "imgurl": "../../img/3dImg/rack_door_back.jpg"
            },
            "skin_right": {
                "imgurl": "../../img/3dImg/rack_door_back.jpg"
            }
        }
    },
    "position": {
        "x": 300,
        "y": 105,
        "z": 120
    },
    "uuid": "",
    "objType": "emptyCabinet",
    "transparent": true
}, {
    "doors": {
        "skins": [{
            "skin_behind": {
                "imgurl": "../../img/3dImg/rack_front_door.jpg"
            },
            "skinColor": 3355443,
            "skin_fore": {
                "imgurl": "../../img/3dImg/rack_door_back.jpg"
            }
        }],
        "doorname": ["cabinet2_6_emptyCabinetdoor_01"],
        "doorType": "lr",
        "doorSize": [1]
    },
    "size": {
        "length": 66,
        "width": 70,
        "thick": 2,
        "height": 200
    },
    "shellname": "cabinet2_6_emptyCabinetshell",
    "show": true,
    "name": "cabinet2_6",
    "scale": {
        "x": 1,
        "y": 1,
        "z": 1
    },
    "style": {
        "skinColor": 16711680,
        "skin": {
            "skin_behind": {
                "imgurl": "../../img/3dImg/rack_door_back.jpg",
                "skinColor": 16711680
            },
            "skin_up": {
                "imgurl": "../../img/3dImg/rack_door_back.jpg"
            },
            "skinColor": 16711680,
            "skin_left": {
                "imgurl": "../../img/3dImg/rack_door_back.jpg"
            },
            "skin_fore": {
                "imgurl": "../../img/3dImg/rack_door_back.jpg",
                "skinColor": 16711680
            },
            "skin_down": {
                "imgurl": "../../img/3dImg/rack_door_back.jpg"
            },
            "skin_right": {
                "imgurl": "../../img/3dImg/rack_door_back.jpg"
            }
        }
    },
    "position": {
        "x": 100,
        "y": 105,
        "z": 320
    },
    "uuid": "",
    "objType": "emptyCabinet",
    "transparent": true
}, {
    "doors": {
        "skins": [{
            "skin_behind": {
                "imgurl": "../../img/3dImg/rack_front_door.jpg"
            },
            "skinColor": 3355443,
            "skin_fore": {
                "imgurl": "../../img/3dImg/rack_door_back.jpg"
            }
        }],
        "doorname": ["cabinet1_6_emptyCabinetdoor_01"],
        "doorType": "lr",
        "doorSize": [1]
    },
    "size": {
        "length": 66,
        "width": 70,
        "thick": 2,
        "height": 200
    },
    "shellname": "cabinet1_6_emptyCabinetshell",
    "show": true,
    "name": "cabinet1_6",
    "scale": {
        "x": 1,
        "y": 1,
        "z": 1
    },
    "style": {
        "skinColor": 16711680,
        "skin": {
            "skin_behind": {
                "imgurl": "../../img/3dImg/rack_door_back.jpg",
                "skinColor": 16711680
            },
            "skin_up": {
                "imgurl": "../../img/3dImg/rack_door_back.jpg"
            },
            "skinColor": 16711680,
            "skin_left": {
                "imgurl": "../../img/3dImg/rack_door_back.jpg"
            },
            "skin_fore": {
                "imgurl": "../../img/3dImg/rack_door_back.jpg",
                "skinColor": 16711680
            },
            "skin_down": {
                "imgurl": "../../img/3dImg/rack_door_back.jpg"
            },
            "skin_right": {
                "imgurl": "../../img/3dImg/rack_door_back.jpg"
            }
        }
    },
    "position": {
        "x": 300,
        "y": 105,
        "z": 320
    },
    "uuid": "",
    "objType": "emptyCabinet",
    "transparent": true
}, {
    "childrens": [{
        "childrens": [{
            "childrens": [{
                "rotation": [{
                    "degree": 0,
                    "direction": "x"
                }, {
                    "degree": 0,
                    "direction": "y"
                }, {
                    "degree": 0,
                    "direction": "z"
                }],
                "show": true,
                "radialSegments": 8,
                "scale": {
                    "x": 1,
                    "y": 1,
                    "z": 1
                },
                "uuid": "",
                "points": [{
                    "x": 0,
                    "y": 0,
                    "z": 0
                }, {
                    "x": 0,
                    "y": 35,
                    "z": 0
                }],
                "segments": 64,
                "name": "cM_桌椅1_63OBJCREN0OBJCREN0OBJCREN0",
                "closed": false,
                "style": {
                    "skinColor": 15790833
                },
                "position": {
                    "x": 0,
                    "y": 119.842,
                    "z": 0
                },
                "radius": 3,
                "objType": "tube"
            }, {
                "childrens": [{
                    "rotation": [{
                        "degree": 0,
                        "direction": "x"
                    }, {
                        "degree": 0,
                        "direction": "y"
                    }, {
                        "degree": 0,
                        "direction": "z"
                    }],
                    "show": true,
                    "radialSegments": 8,
                    "scale": {
                        "x": 1,
                        "y": 1,
                        "z": 1
                    },
                    "uuid": "",
                    "points": [{
                        "x": 0,
                        "y": 20,
                        "z": 0
                    }, {
                        "x": 30,
                        "y": 10,
                        "z": 0
                    }, {
                        "x": 40,
                        "y": 0,
                        "z": 0
                    }],
                    "segments": 64,
                    "name": "cM_桌椅1_63OBJCREN0OBJCREN0OBJCREN1OBJCREN0",
                    "closed": false,
                    "style": {
                        "skinColor": 14676206
                    },
                    "position": {
                        "x": 0,
                        "y": 100,
                        "z": 0
                    },
                    "radius": 2,
                    "objType": "tube"
                }, {
                    "segmentsY": 0,
                    "radiusBottom": 4,
                    "segmentsX": 100,
                    "rotation": [{
                        "degree": 1.5707963267948963,
                        "direction": "x"
                    }, {
                        "degree": 0,
                        "direction": "y"
                    }, {
                        "degree": 0,
                        "direction": "z"
                    }],
                    "name": "cM_桌椅1_63OBJCREN0OBJCREN0OBJCREN1OBJCREN1",
                    "scale": {
                        "x": 1,
                        "y": 1,
                        "z": 1
                    },
                    "openEnded": false,
                    "style": {
                        "skinColor": 16776960,
                        "skin": {
                            "skin_up": {
                                "skinColor": 4342338
                            },
                            "skin_side": {
                                "skinColor": 4342338
                            },
                            "skin_down": {
                                "skinColor": 4342338
                            }
                        }
                    },
                    "position": {
                        "x": 40.373,
                        "y": 96.989,
                        "z": -0.2281064684102727
                    },
                    "objType": "cylinder",
                    "radiusTop": 4,
                    "height": 4
                }],
                "rotation": [{
                    "degree": 0,
                    "direction": "x"
                }, {
                    "degree": 0,
                    "direction": "y"
                }, {
                    "degree": 0,
                    "direction": "z"
                }],
                "show": true,
                "name": "cM_桌椅1_63OBJCREN0OBJCREN0OBJCREN1",
                "scale": {
                    "x": 1,
                    "y": 1,
                    "z": 1
                },
                "position": {
                    "x": 0,
                    "y": 0,
                    "z": 0
                },
                "uuid": "",
                "objType": "GroupObj"
            }, {
                "childrens": [{
                    "rotation": [{
                        "degree": 0,
                        "direction": "x"
                    }, {
                        "degree": 0,
                        "direction": "y"
                    }, {
                        "degree": 0,
                        "direction": "z"
                    }],
                    "show": true,
                    "radialSegments": 8,
                    "scale": {
                        "x": 1,
                        "y": 1,
                        "z": 1
                    },
                    "uuid": "",
                    "points": [{
                        "x": 0,
                        "y": 20,
                        "z": 0
                    }, {
                        "x": 30,
                        "y": 10,
                        "z": 0
                    }, {
                        "x": 40,
                        "y": 0,
                        "z": 0
                    }],
                    "segments": 64,
                    "name": "cM_桌椅1_63OBJCREN0OBJCREN0OBJCREN2OBJCREN0",
                    "closed": false,
                    "style": {
                        "skinColor": 14676206
                    },
                    "position": {
                        "x": 0,
                        "y": 100,
                        "z": 0
                    },
                    "radius": 2,
                    "objType": "tube"
                }, {
                    "segmentsY": 0,
                    "radiusBottom": 4,
                    "segmentsX": 100,
                    "rotation": [{
                        "degree": 1.5707963267948963,
                        "direction": "x"
                    }, {
                        "degree": 0,
                        "direction": "y"
                    }, {
                        "degree": 0,
                        "direction": "z"
                    }],
                    "name": "cM_桌椅1_63OBJCREN0OBJCREN0OBJCREN2OBJCREN1",
                    "scale": {
                        "x": 1,
                        "y": 1,
                        "z": 1
                    },
                    "openEnded": false,
                    "style": {
                        "skinColor": 16776960,
                        "skin": {
                            "skin_up": {
                                "skinColor": 4342338
                            },
                            "skin_side": {
                                "skinColor": 4342338
                            },
                            "skin_down": {
                                "skinColor": 4342338
                            }
                        }
                    },
                    "position": {
                        "x": 40.373337511555206,
                        "y": 96.98891109282378,
                        "z": -0.2281064684102727
                    },
                    "objType": "cylinder",
                    "radiusTop": 4,
                    "height": 4
                }],
                "rotation": [{
                    "degree": -3.141592653589793,
                    "direction": "x"
                }, {
                    "degree": -0.9728629830197867,
                    "direction": "y"
                }, {
                    "degree": -3.141592653589793,
                    "direction": "z"
                }],
                "show": true,
                "name": "cM_桌椅1_63OBJCREN0OBJCREN0OBJCREN2",
                "scale": {
                    "x": 1,
                    "y": 1,
                    "z": 1
                },
                "position": {
                    "x": 0,
                    "y": 0,
                    "z": 0
                },
                "uuid": "",
                "objType": "GroupObj"
            },  ]
View Code

 

最后是 整个数据中心的效果:

 

也可创建综合类机房 有普通机柜 有微模块

效果如下:

三、逻辑功能实现

1、选择查看单个机柜,查看机柜详情,了解该机柜内的服务器排布情况

代码实现:

 

 if (modelBussiness.showSingleServerNeedVitures.length > 0) {
                WT3DObj.commonFunc.changeObjsOpacity(modelBussiness.showSingleServerNeedVitures, 0.2, 1, 200, function () {
                    $.each(modelBussiness.showCabServers, function (_index, _obj) {
                        _obj.visible = true;
                    });
                });
            }
            _this.openCabDoor(_obj);
   if (modelBussiness.lastMouseInCurrentObj.name.indexOf("OBJCREN7") > 0 || modelBussiness.lastMouseInCurrentObj.name.indexOf("OBJCREN8") > 0) {
            this.commonFunc.opcabinetBackLeftdoor(_obj.doors.leftDoor);
            this.commonFunc.opcabinetBackRightdoor(_obj.doors.rightDoor);
        } else if (modelBussiness.lastMouseInCurrentObj.name.indexOf("OBJCREN9") > 0) {
            this.commonFunc.opcabinetMaindoor(_obj.doors.mainDoor);
        }

        setTimeout(function () {

            if (_obj.doors.leftDoor.doorState == undefined || _obj.doors.leftDoor.doorState == "close") {

                if (_obj.doors.rightDoor.doorState == undefined || _obj.doors.rightDoor.doorState == "close") {

                    if (_obj.doors.mainDoor.doorState == undefined || _obj.doors.mainDoor.doorState == "close") {
                        modelBussiness.commonFunc.showCabnetDetail(_obj, function () {
                        });
                    }
                }
            }
        }, 200);

 

2、综合查看微模块的热力云图,空间使用情况,电力情况,制冷,承重等等。

代码实现:

 {
                btnid: "btn_reset",
                btnTitle: "场景复位",
                btnimg: "../../img/3dImg/reset.png",
                sortnub: 0,
                btnType: "system",
                enable: true,
                show_event: function () {
                    if (modelBussiness.lock == true) {
                        layer.tips("当前正在运行" + modelBussiness.currentLockDetail, "#btn_space");
                        return;
                    }
                    modelBussiness.currentLockDetail = "场景复位";
                    modelBussiness.lock = true;
                    setTimeout(function () {
                        modelBussiness.lock = false;
                    }, 1000);
                    modelBussiness.backBtn();
                },
            },
            {
                btnid: "btn_fps",
                btnTitle: "3D性能监测",
                btnimg: "../../img/3dImg/fps.png",
                sortnub: 0,
                btnType: "system",
                enable: true,
                show_event: function () {

                    var display = $("#Stats_output").css("display");
                    if (display == "none") {
                        $("#Stats_output").show();
                    } else {
                        $("#Stats_output").hide();
                    }
                },
            },
            {
                btnid: "btn_space",
                btnTitle: "机柜利用率",
                btnimg: "../../img/3dImg/space.png",
                sortnub: 0,
                btnType: "system",
                enable: true,
                show_event: function () {
                    if (modelBussiness.lock == true) {
                        layer.tips("当前正在运行" + modelBussiness.currentLockDetail, "#btn_space");
                        return;
                    }
                    modelBussiness.currentLockDetail = "机柜利用率";
                    modelBussiness.lock = true;
                    setTimeout(function () {
                        modelBussiness.lock = false;
                    }, 2000);
                    modelBussiness.showSpaceRate();
                },
            },
            {
                btnid: "btn_usage",
                btnTitle: "可用空间",
                btnimg: "../../img/3dImg/usage.png",
                sortnub: 0,
                btnType: "system",
                enable: true,
                show_event: function () {
                    if (modelBussiness.lock == true) {
                        layer.tips("当前正在运行" + modelBussiness.currentLockDetail, "#btn_usage");
                        return;
                    }
                    modelBussiness.currentLockDetail = "可用空间";
                    modelBussiness.lock = true;
                    setTimeout(function () {
                        modelBussiness.lock = false;
                    }, 2000);
                    modelBussiness.showUsageMap();
                },
            },

            {
                btnid: "btn_lines",
                btnTitle: "走线管理",
                btnimg: "../../img/3dImg/connection.png",
                sortnub: 0,
                btnType: "system",
                enable: true,
                show_event: function () {
                    if (modelBussiness.lock == true) {
                        layer.tips("当前正在运行" + modelBussiness.currentLockDetail, "#btn_lines");
                        return;
                    }
                    modelBussiness.currentLockDetail = "走线管理";
                    modelBussiness.lock = true;
                    setTimeout(function () {
                        modelBussiness.lock = false;
                    }, 1000);
                    modelBussiness.showLines();
                },
            },
            {
                btnid: "btn_temperature",
                btnTitle: "温度云图",
                btnimg: "../../img/3dImg/temperature.png",
                sortnub: 0,
                btnType: "system",
                enable: true,
                show_event: function () {
                    if (modelBussiness.lock == true) {
                        layer.tips("当前正在运行" + modelBussiness.currentLockDetail, "#btn_temperature");
                        return;
                    }
                    modelBussiness.currentLockDetail = "温度云图";
                    modelBussiness.lock = true;
                    setTimeout(function () {
                        modelBussiness.lock = false;
                    }, 2000);
                    modelBussiness.showTemptureMap();
                },
            },
            {
                btnid: "btn_water",
                btnTitle: "湿度",
                btnimg: "../../img/3dImg/water.png",
                sortnub: 0,
                btnType: "system",
                enable: true,
                show_event: function () {
                    if (modelBussiness.lock == true) {
                        layer.tips("当前正在运行" + modelBussiness.currentLockDetail, "#btn_water");
                        return;
                    }
                    modelBussiness.currentLockDetail = "湿度效果";
                    modelBussiness.lock = true;
                    setTimeout(function () {
                        modelBussiness.lock = false;
                    }, 2000);
                    modelBussiness.showHumidity();
                },
            },
            {
                btnid: "btn_smokeAlarm",
                btnTitle: "烟雾模拟",
                btnimg: "../../img/3dImg/smoke.png",
                sortnub: 0,
                btnType: "system",
                enable: true,
                show_event: function () {
                    if (modelBussiness.lock == true) {
                        layer.tips("当前正在运行" + modelBussiness.currentLockDetail, "#btn_smokeAlarm");
                        return;
                    }
                    modelBussiness.currentLockDetail = "烟雾模拟";
                    modelBussiness.lock = true;
                    setTimeout(function () {
                        modelBussiness.lock = false;
                    }, 2000);
                    modelBussiness.showFireAlarm();

                },
            },
            {
                btnid: "btn_winds",
                btnTitle: "空调风向",
                btnimg: "../../img/3dImg/air.png",
                sortnub: 0,
                btnType: "system",
                enable: true,
                show_event: function () {
                    if (modelBussiness.lock == true) {
                        layer.tips("当前正在运行" + modelBussiness.currentLockDetail, "#btn_winds");
                        return;
                    }
                    modelBussiness.currentLockDetail = "空调风向";
                    modelBussiness.lock = true;
                    setTimeout(function () {
                        modelBussiness.lock = false;
                    }, 1000);
                    modelBussiness.showWinds();
                },
            },
            //{
            //    btnid: "btn_power",
            //    btnTitle: "配店组",
            //    btnimg: "../../img/3dImg/power.png",
            //    sortnub: 0,
            //    btnType: "system",
            //    enable: true,
            //    show_event: function () {
            //        modelBussiness.showWinds();
            //    },
            //},
            //{
            //    btnid: "btn_alarm",
            //    btnTitle: "告警",
            //    btnimg: "../../img/3dImg/alarm.png",
            //    sortnub: 0,
            //    btnType: "system",
            //    enable: true,
            //    show_event: function () {
            //        modelBussiness.showWinds();
            //    },
            //},
            //{
            //    btnid: "btn_person",
            //    btnTitle: "巡检",
            //    btnimg: "../../img/3dImg/person.png",
            //    sortnub: 0,
            //    btnType: "system",
            //    enable: true,
            //    show_event: function () {
            //        modelBussiness.showWinds();
            //    },
            //},

 

3、服务器下架操作

代码实现:

 

  var _this = modelBussiness;
    _this.currentShowServerNames = [];
    var cabinetName = cabinetobj.name;
    if (_this.Devs[cabinetName] && _this.Devs[cabinetName].devs && _this.Devs[cabinetName].devs.length > 0) {
        $.each(_this.Devs[cabinetName].devs, function (_index, _obj) {
            _obj.visible = true;
            _this.currentShowServerNames.push(_obj.name);
        });
    } else {
        var devJsonModels = [];
        //1u 高度8.5 位置42
        if (devs && devs.length > 0) {
            $.each(devs, function (_index, _obj) {
                var height = (_obj.devURange.max - _obj.devURange.min + 1) * 8.2;
                var positiony = height / 2 + 42 + (_obj.devURange.min - 1) * 8.5;
                var postioinx = cabinetobj.position.x;
                var postioinz = cabinetobj.position.z;
                var rotationy = cabinetobj.rotation.y + Math.PI;
                var name = cabinetobj.name + "_Server_" + _index;
                if (!_obj.devCustomSkin) {
                    var servvers = ["../img/3dImg/server2.jpg", "../img/3dImg/server3.jpg", "../img/3dImg/server1.jpg"];
                    _obj.devCustomSkin = {
                        up: "../img/3dImg/rack_inside.jpg",
                        down: "../img/3dImg/rack_inside.jpg",
                        fore: servvers[parseInt(Math.random() * 3)],
                        behind: servvers[parseInt(Math.random() * 3)],
                        left: "../img/3dImg/server_side.jpg",
                        right: "../img/3dImg/server_side.jpg",
                    }
                }
                var server = getSingleServerModel(cabinetobj.name + "_Server_" + _index, { "x": postioinx, "y": positiony, "z": postioinz }, height, rotationy, _obj.devId, _obj.devCustomSkin);
                server.BindDevId = _obj.devId;
                devJsonModels.push(server);
                _this.currentShowServerNames.push(name);
            });
            WT3DObj.commonFunc.loadModelsByJsons(devJsonModels, { x: 0, y: 0, z: 0 }, { x: 0, y: 0, z: 0 }, true);
            _this.Devs[cabinetName] = {
                devs: WT3DObj.commonFunc.findObjectsByNames(_this.currentShowServerNames)
            };
        }
    }

 

 

 

4、服务器上架操作

代码实现:

 

    if (_this.needHideCabinets.length > 0) {
        WT3DObj.commonFunc.changeCameraPosition({ x: 2531, y: 3967, z: -1150 }, { x: -615, y: 0, z: -35 }, 1000, function () {
            $.each(_this.needHideCabinets, function (_index, _obj) {
                if (_obj.name.indexOf("_rate_") < 0 && _obj.name.indexOf("_yearCube_") < 0) {
                    _obj.visible = true;
                }
            });
        });
    }
    if (_this.needHideobjs.length > 0) {

        _this.hideDevs();
        WT3DObj.commonFunc.changeCameraPosition({ x: 2531, y: 3967, z: -1150 }, { x: -615, y: 0, z: -35 }, 1000, function () {

            $.each(_this.needHideobjs, function (_index, _obj) {
                if (_obj.name.indexOf("TCL_line_") < 0 && _obj.name.indexOf("_wind") < 0) {
                    _obj.visible = true;
                    if (_obj.children && _obj.children.length > 0) {
                        $.each(_obj.children, function (_cindex, _cobj) {
                            _cobj.visible = true;
                        });
                    }
                }
            });
            if (_this.currentShowCabinet) {
                _this.currentShowCabinet.visible = false;
            }
            WT3DObj.commonFunc.changeObjsOpacity(_this.needHideobjs, 0.01, 1, 1000, function () {

                _this.hideLines();
                _this.hideWinds();
                _this.hideUsageSpaceRate();
                _this.hideSpaceRate();
            });
        });
    }

 

 

 

5、服务器计划上架 计划下架操作

实现方式:

 

      layer.closeAll();
                    console.log(result);
                    var cabNoUse = {};
                    if (result && result.length && result.length > 0) {
                        $.each(result, function (_index, _obj) {
                            var _cab = wtserverAPI.getCabinetByUUID(modelBussiness.roomName, _obj.cabid);
                            if (_cab && _cab.cabName) {
                                var ageValue = [];
                                if (_obj.uPositionUsed && _obj.uPositionUsed.length && _obj.uPositionUsed.length > 0) {
                                    for (var j = 0; j < _obj.uPositionUsed.length - 1; j++) {
                                        if (j == 0) {
                                            ageValue.push({
                                                value: 1,
                                                max: _obj.uPositionUsed[0],
                                                min: _obj.uPositionUsed[0]
                                            });
                                        }
                                        if (_obj.uPositionUsed[j + 1] - _obj.uPositionUsed[j] > 1) {
                                            ageValue.push({
                                                value: 1,
                                                max: _obj.uPositionUsed[j + 1],
                                                min: _obj.uPositionUsed[j + 1]
                                            });
                                        } else {
                                            ageValue[ageValue.length - 1].max = _obj.uPositionUsed[j + 1];
                                        }
                                    }
                                }
                                cabNoUse[_cab.cabName] = ageValue;
                            }
                        });
                    }
                    console.log(cabNoUse);
                    for (var i = 0; i < allCabs.length; i++) {
                        var itcobj = WT3DObj.commonFunc.findObject(allCabs[i]);
                        var ageValue = [];
                        if (cabNoUse[allCabs[i]]) {
                            ageValue = cabNoUse[allCabs[i]];
                        }
                        var style = {
                            borderColor: 0x4444,
                            outColor: 0xFFFFFF,
                            outOprity: 0.1
                        };
                        if (itcobj) {
                            _this.commonFunc.createUseageCube(allCabs[i],
                                { x: 160, y: 380, z: 140 },
                                { x: itcobj.position.x, y: itcobj.position.y, z: itcobj.position.z },
                                { x: 0, y: 0, z: 0 },
                                ageValue,
                                style, { timelong: 1000 }, i);
                        }
                    }
                }, function (err) {
                    layer.closeAll();
                    var cabNoUse = {};
                    for (var i = 0; i < allCabs.length; i++) {
                        var itcobj = WT3DObj.commonFunc.findObject(allCabs[i]);
                        var ageValue = [];
                        if (cabNoUse[allCabs[i]]) {
                            ageValue = cabNoUse[allCabs[i]];
                        }
                        var style = {
                            borderColor: 0x4444,
                            outColor: 0xFFFFFF,
                            outOprity: 0.1
                        };
                        if (itcobj) {
                            _this.commonFunc.createUseageCube(allCabs[i],
                                { x: 160, y: 380, z: 140 },
                                { x: itcobj.position.x, y: itcobj.position.y, z: itcobj.position.z },
                                { x: 0, y: 0, z: 0 },
                                ageValue,
                                style, { timelong: 1000 }, i);
                        }
                    }
                });

 

 

 

 

下节预告:

  下节课主要讲解微模块的实现与功能

 

技术交流 1203193731@qq.com

交流微信:

    

如果你有什么要交流的心得 可邮件我

 

下级预告:

下节课还是讲解3D机房相关的知识,出一些不一样的展示效果。关注点在机柜服务器上 而外部的动力环境不做渲染

 

其它相关文章:

如何用webgl(three.js)搭建一个3D库房-第一课

如何用webgl(three.js)搭建一个3D库房,3D密集架,3D档案室,-第二课

使用webgl(three.js)搭建一个3D建筑,3D消防模拟——第三课

使用webgl(three.js)搭建一个3D智慧园区、3D建筑,3D消防模拟,web版3D,bim管理系统——第四课

如何用webgl(three.js)搭建不规则建筑模型,客流量热力图模拟

 
使用webgl(three.js)创建3D机房(升级版)-普通机房

 


原文链接:https://www.cnblogs.com/yeyunfei/p/10484241.html
如有疑问请与原作者联系

标签:

版权申明:本站文章部分自网络,如有侵权,请联系:west999com@outlook.com
特别注意:本站所有转载文章言论不代表本站观点,本站所提供的摄影照片,插画,设计作品,如需使用,请与原作者联系,版权归原作者所有

上一篇:数据存贮一

下一篇:关于node对文件的读取