12. French
13. Swiss French
14. United Kingdom
15. Hungarian
16. Italian
17. Japanese
18. Norwegian
Press [Enter] for the next page or
enter the number for your keyboard layout country: 1
***选1；怎么没有中文Layout的键盘？
3、配置屏幕排布
==============================================================================
FireGL Screen Layout
==============================================================================
------------------------------------------------------------------------------
| Maximum resolution for OpenGL operation |
| |
| - R200 chip family (Radeon 8500-9100 Pro, FireGL 8700/8800/E1): 2048x2048 |
| - R300 chip family (Radeon 9500-9700 Pro, FireGL E1 /Z1/X1/X1 ): 2560x2560 |
------------------------------------------------------------------------------
Choose configuration from the list below
1. Single Head (1 screen, second dark)
2. Clone Mode (2 screens - same content)
3. Big Desktop (2 screens - one framebuffer)
4. Dual Head (2 screens - two drivers)
Enter the number for your configuration: [1]
***单头就单头吧，虽然显卡是双头的，
4、配置显示器
==============================================================================
Monitor Settings
==============================================================================
Now we want to set the specifications of the monitor(s). The two critical
parameters are the vertical refresh rate, which is the rate at which the
the whole screen is refreshed, and most importantly the horizontal sync rate,
which is the rate at which scanlines are displayed.
The valid range for horizontal sync and vertical sync should be documented
in the manual of your monitor. If in doubt, check the monitor database
/usr/X11R6/lib/X11/doc/Monitors to see if your monitor is there.
Press [Enter] to continue, or [Ctrl] 'c' to abort.
***回车就行
You must indicate the horizontal sync range of your monitor. You can either
select one of the predefined ranges below that correspond to industry-
standard monitor types, or give a specific range.
It is VERY IMPORTANT that you do not specify a monitor type with a horizontal
sync range that is beyond the capabilities of your monitor. If in doubt,
choose a conservative setting.
hsync in kHz; monitor type with characteristic modes
1. 31.5 ; up to 640x480 @ 60 Hz (VGA)
2. 31.5 - 37.9; up to 800x600 @ 60 Hz (SVGA)
3. 31.5 - 48.4; up to 1024x768 @ 60 Hz (XGA)
4. 31.5 - 60.0; up to 1024x768 @ 75 Hz (XGA)
5. 31.5 - 68.7; up to 1024x768 @ 85 Hz (XGA)
6. 31.5 - 80.5; up to 1280x1024 @ 75 Hz (SXGA)
7. 31.5 - 91.1; up to 1280x1024 @ 85 Hz (SXGA)
8. Enter your own horizontal sync range
Enter your choice ( 1 - 8 ) : [1] 8
***我选自定义
Please enter the horizontal sync range of your monitor, in the format used
in the table of monitor types above. You can either specify one or more
continuous ranges (e.g. 15-25, 30-50), or one or more fixed sync frequencies.
Horizontal sync range: 30.0-92.0
***这是从原来的XF86config文档里面抄出来的
You must indicate the vertical sync range of your monitor. You can either
select one of the predefined ranges below or give a specific range.
1. 20 - 60 (e.g. slow scan flat panels with DVI cable)
2. 50 - 70 (VGA)
3. 60 - 75
4. 60 - 85
5. 60 - 100
6. Specify your own vertical sync range
Enter your choice: [1] 6
***还是选自定义
Vertical sync range:50.0-160.0
***还是抄出来的
5、显示模式
==============================================================================
Display Modes
==============================================================================
The default resolution that the server will start-up with will be the first
listed mode that can be supported by the monitor and card.
Currently it is set to:
"640x480" for 24-bit
Modes that cannot be supported due to monitor or clock constraints will
be automatically skipped by the server.
1. Change the modes for 24-bit (24-bit color)
2. The modes are OK, continue.
Enter your choice: 1
***当然要改，选一
Select your modes from the following list:
1 "640x480"
2 "800x600"
3 "1024x768"
4 "1152x864"
5 "1280x960"
文章整理：西部数码--专业提供域名注册、虚拟主机服务
http://www.west263.com
以上信息与文章正文是不可分割的一部分,如果您要转载本文章,请保留以上信息，谢谢!
