谢了

hgzwjl 回复于:2002-11-28 16:06:57
各位大虾,小弟要装一台f3800,客户要2个域,请装过的大虾写个简要说明、注意事项什么的,小弟在此感激不尽

hgzwjl 回复于:2002-11-28 16:48:16
我顶

hgzwjl 回复于:2002-11-28 16:49:14
使劲顶


hgzwjl 回复于:2002-11-28 16:50:40
不行了

hgzwjl 回复于:2002-11-28 16:54:14
不行了,也要顶

hgzwjl 回复于:2002-11-28 17:02:19
大虾,行行好,实在顶不动了

hgzwjl 回复于:2002-11-28 17:10:53
难道还没醒吗,MMMMN

mmmmn 回复于:2002-11-28 17:12:20
我没摸过3800,您叫我有什么用?找YT吧

hgzwjl 回复于:2002-11-28 17:15:49
带8的不都相同吗? mmmmn and YT and ....thank you

coolbid 回复于:2002-11-28 18:33:09
帮您顶一下,

procrus 回复于:2002-11-28 18:43:50
我曾见到过4800,但是没有动手装过。

procrus 回复于:2002-11-28 18:56:13
我这里有一份从客户那里弄来得文档,也许对您有点帮助
ultra10c# tip hardwire
connected


These Menu functions are subject to change
without any advanced notice
'0' Return to SC RTOS
'1' PeekPoke
'2' Dump
'3' IIep Tests Menu
'4' DRAM Tests Menu
'5' Cheerio Tests Menu
'6' System Clock Tests Menu
'7' SBBC Tests Menu
'8' Local SC I2C Device Tests Menu
'9' Other Global I2C Device Tests Menu
'a' TOD Tests Menu
'b' InterSC DUART Tests Menu
'c' AM29F040B(512KX Tests Menu
'd' SC PROM Tests Menu
'e' InterSC board Tests Menu
'f' CBH Tests Menu
'A' System Error Dump
'B' Toggle Trace Flag
'C' Global I2C Read Command
'D' Global I2C Write Command
'E' Set Diag Level
'F' RIO Tests Menu
'G' Return to next test case
Selection: 0
ERI Device Present
Getting MAC address for SSC0
MAC address is 0:3:ba:7:b0:52
Attaching interface lo0...done

Adding 2854 symbols for standalone.
interrupt: 100 Mbps full duplex link up

Copyright 2001 Sun Microsystems, Inc. All rights reserved.

Sun Fire 3800-6800 System Controller
RTOS version: 19
ScApp version: 5.12.5
SC POST diag level: min

The date is Wednesday, March 6, 2002, 6:28:24 PM CST.

Mar 06 18:28:25 noname Platform.SC: Boot: ScApp 5.12.5, RTOS 19
Mar 06 18:28:26 noname Platform.SC: SBBC Reset Reason(s): Peer Reset, SC Reset Button
Mar 06 18:28:29 noname Platform.SC: Clock Source: 75MHz
Mar 06 18:28:31 noname Platform.SC: Master System Controller
Mar 06 18:28:33 noname Platform.SC: Chassis is in dual partition mode.
Mar 06 18:28:37 noname Platform.SC: Frame Manager monitoring is disabled, communication error
Mar 06 18:28:38 noname Platform.SC: NOTICE: FT0 has no grid power
Mar 06 18:28:38 noname Platform.SC: NOTICE: FT1 has no grid power
Mar 06 18:28:38 noname Platform.SC: NOTICE: FT2 has no grid power


System Controller 'noname.example.com':

Type 0 for Platform Shell

Type 1 for domain A console
Type 2 for domain B console
Type 3 for domain C console
Type 4 for domain D console

Input: 0

Platform Shell

noname:SC> Mar 06 18:28:48 noname Platform.SC: Clock failover enabled.

noname:SC> help

Platform Shell commands:

addboard -- assign a board to a domain
connections -- show connections to the system controller or a domain
console -- connect to a domain shell/console
deleteboard -- unassign a board from a domain
disablecomponent -- add a component to the blacklist
disconnect -- disconnect this connection or a specified connection
dumpconfig -- save the system controller configuration to a server
enablecomponent -- remove a component from the blacklist
flashupdate -- update firmware
help -- show help for a command or list commands
history -- show command history
password -- set the platform or domain password
poweroff -- powers off components
poweron -- powers on components
reboot -- reboot the system controller
restoreconfig -- restore the system controller configuration from a server
setdate -- set the date and time for the platform
setdefaults -- set default configuration values
setkeyswitch -- set the keyswitch position for a domain
setupplatform -- configure the platform
showboards -- show board information
showcomponent -- show state of a component
showdate -- show the current date and time for the platform
showenvironment -- show environmental information
showkeyswitch -- show the keyswitch positions
showlogs -- show the logs
showplatform -- show platform configuration, information and domain status
showsc -- show system controller version and uptime
testboard -- test a CPU/Memory board

文章整理:西部数码--专业提供域名注册虚拟主机服务
http://www.west263.com
以上信息与文章正文是不可分割的一部分,如果您要转载本文章,请保留以上信息,谢谢!