建置安全的 exchange server 2003 internet 存取环境问题集(1)_exchange server

Q1:

Exchange Server 标准版和 Exchange Server 企业版之间有何差异？

A:

请参考 http://support.microsoft.com/default.aspx?scid=%2fdirectory%2fworldwide%2fzh-tw%2ffaq%2f3266.asp#q4

Q2:

Exchange 2003 Server可以设定寄件备份吗？

A:

可勾选 Information Store Proprieties 中的 Archive all messages sent or received by mailboxes on this store 可将所有进出的信件备份一份至其它信箱或是公用数据夹中

Q3:

Exchange2003 Server上可设定从Outlook寄出的信，再从对方收件匣中回收吗？

A:

从Outlook寄件备份中点开愈回收信件 ，工具列执行 回收这封邮件

Q4:

我用Outlook 2003 经RPC over http但都连不上，有什么要注意的 吗?

A:

要完成RPC Over HTTP的前提如下：
Server 端：
１．所有DC，GC，Exchange Server 2003都必须为Windows Server 2003且已经安装了ROH Protocol
２．在AD环境中必需要有一台企业根CA Server
３．依照Exchange Server 2003 Whats News中的第二章修改相关的Register Key(GC and EX03)
４．将RPC Proxy Server Publish至Internet上(当然要先替IIS申请WebSSL凭证)
Client端：
１．WinXP With SP1 And Hotfix KB331320，Outlook2003
２．向AD CA Server申请使用者凭证
３．依照Exchange Server 2003 Whats News中的第二章中的设定建立Outlook2003 RPC Profile

Q5:

请问要如何check Exchange 2003 sp version？

A:

目前Exchange 2003尚未有Service Pack ，未来您可以在 Exchange System Manger 中的 Server Name 的内容中得知所安装的 Service Pack 版本

Q6:

我在Exchange2003 Server上，要如何新增公用数据夹？

A:

打开ESM＼找到系统管理群组＼First Administrator Group＼数据夹＼公用数据夹　 按右键新增公用数据夹

Q7:

要更新Exchange 2003 Cluster的Windows SP4，我该如何更新及需注意的事项？

A:

This article outlines the procedure for installing a Service Pack on Microsoft Windows Clustering. The process of applying a Service Pack to a server cluster is the same as applying it to Microsoft Windows 2000 or Microsoft Windows NT 4.0 Enterprise Edition Server. However, special consideration must be taken to ensure a high level of access for clients when you perform this system maintenance. NOTE: You must install Service Pack 3 (SP3) at the end of the Windows NT 4.0 Enterprise Edition installation to complete the installation. This is the only scenario where you cannot bypass a previous Service Pack and apply a later one.
MORE INFORMATION ================
You can install Windows NT Server and Windows 2000 Service Packs on server cluster nodes using the following procedure. Always install the same Service Packs or hotfixes to each node. Use this procedure to install the Service Packs unless otherwise directed by a particular Service Pack version.
1. Check the System event log for errors and ensure proper system operation.
2. Make sure you have a current backup and updated emergency repair disk for each system. In the event of corrupt files, power outage, or incompatibility, it may be necessary to revert back to the state of the system prior to attempting to install the Service Pack.
3. Open Cluster Administrator, right-click Node A, and then click Pause Node.
4. Right-click Node A, click Move Group for all groups owned by Node A to move all groups to Node B.
5. Install the Service Pack on Node A, and then restart the computer.
6. Check the System event log for errors. If you find any errors, troubleshoot them before continuing this process.
7. In Cluster Administrator, right-click Node A, and then click Resume Node.
8. In Cluster Administrator, right-click Node B, and then click Pause Node.
9. Right-click Node B, and then click Move Group for all groups owned by Node B to move all groups to Node A.
10. Install the Service Pack on Node B, and then restart the computer.
11. Check the system event log for errors. If you find any errors, troubleshoot them before continuing this process.
12. In Cluster Administrator, right-click Node B, and then click Resume Node.
13. Right-click each group, click Move Group, and then move the groups back to their preferred owner.

Q8:

请问搭配 Exchange 2000和Exchange 2003 Server的ISA Server有何不同功能吗？

A:

The ISA function will be same regardless what exchange server are you using

Q9:

要怎么设定，才能将Exchange Server上的全域通讯簿下载到outlook里的通讯簿里呢？

A:

请参考KB；http://support.microsoft.com/default.aspx?scid=kb;zh-tw;149447%26amp;Product=echIN1

Q10:

要从Exchange 2003 server移转mail server到Exchange 2003 server上，要怎样才能顺利移转呢？

A:

将两台Exchange2003安装在同一个站台(Site)下面，然后移动信箱(Exchange Task)至 另一台Exchange Server即可

Q11:

为什么从外地寄来的E-Mail会很久才收到信？

A:

please reference this KB for some hints XADM: Mail Delivery Is Significantly Delayed and Event ID 9004 Appears in the Application Log
http://support.microsoft.com/default.aspx?scid=kb;en- us;816199%26amp;Product=exchange

Q12:

可以不让使用者浏览网页内的图档吗？

A:

应该使用具有网页过滤功能的产品！ 或者你可以使用ISA Firewall中的Site And Contan Rul来做管制！

Q13:

在Exchange 2003 Server上要做什么设定，才能杜绝垃圾信件进呢？

A:

请参考 http://support.microsoft.com/default.aspx?scid=kb;zh-tw;821746%26amp;Product=exch2003

Q14:

如何指定专人可更改某邮件群组权限吗？

A:

给予该使用者网域Account Operator 权限

Q15:

请问RPC Application Filter是什么？

A:

用来过滤使用 RPC 通讯协议的应用程序，This RPC Application Filter functionality checks the RPC Fragmentation flags that are set by the external RPC client that is trying to connect to the published RPC server behind ISA Server

Q16:

请问防火墙的组织架构大致有分哪几种？

A:

For a secure configuration configure a DMZ for public access server

Q17:

请问如何查看Queue 里面的信件内容及状态？

A:

please reference this KB: http://support.microsoft.com/default.aspx?scid=kb;en- us;823489%26amp;Product=exch2k

Q18:

不同的Domain但有做互相信任，要做怎样的设定才能互用对方的公用数据夹？

A:

这恐怕有技术上的限制！

Q19:

要如何重整Exchange 2003 Server数据库？

A:

Dismount Information Store 之后 ，使用 essential /d 指令来重整数据库档案 Essential /d Defrayments the Database and the Streaming File
http://support.microsoft.com/default.aspx?scid=kb;en-us;254132

Q20:

请问Exchange 2003 Server有没有自动关机指令？

A:

这是属于Windows层面，你可以利用SHUTDOWN这只指令来做排程执行

Q21:

请教一下，Exchange 2003 server之ESM中，收发信件的档案最大皆为2G时，若只有一封必收的信却超过2G时，该做什么处理才能收下呢？

A:

在 Exchange AD Users and Computers 更改收件者Storage Limits